CW2000-BW50100T1PGSAH3WX.X.X is indoor access point with high power, according with 802.11a/b/g/n protocol, wireless speed ran reach up to 300Mbps.
By adopting high-end chips and components, optimized RF technology, support greater coverage with good signal quality, flexible deployment, which has a good price-performance ratio
CW2000-BW50100T1PGSAH3WX.X.X is located at the access layer. Featuring wide operating temperature(0℃~+65℃), POE function, rich software features, multiple WIFI authentication methods, and optimized remote wireless transmission, the access point provide assurance for stable and reliable point-to-multi point transmission, can be widely used in restaurants, hotels, business offices and other public places.
Key Features
1 x 10/100Base-TX RJ45 interface（802.3af POE PD） |
802.11b/g/n, 2*2 MIMO, Wireless speed up to 300Mbps |
500mW high power RF output, high receive sensitivity, dynamic adjustment power |
Optimized Antenna design, excellent capability of signal penetration |
Point to point, point to multipoint bridging |
Support multiple WIFI authentication methods and WIFI security |
Using innovative PsEvolution reject weak signal technology, active trigger weak signal reconnection |
Intelligent speed limit, intelligent coordination, stable wireless access, fluid data transmission |
Specification
Port Information | Port：1 x 10/100Base-TX,RJ45, auto-negotiation |
Antenna interface：built-in 3dBi dual polarized antenna |
Power Interface：POE PD |
Reset port：one reset button |
Mechanical Structure | Dimensions：45 mm(H)× 195mm(D)× 195 mm(W) |
Mounting：Wall-mounting or ceiling-mounting |
Weight：<320g |
Protection Grade：IP20 |
Environmental Requirement | Operating Temperature：0℃～ +65℃ |
Storage Temperature：-40℃～ +85℃ |
Relative Humidity：5% ～ 95% (non-condensation) |
MTBF : 500000 h |
Power Requirement | Operating Voltage：DC 48V |
Power：POE PD（802.3af） |
Power Consumption：Full-load<6W |
Operating mode | 2*2MIMO,dual space flow, fat AP/lean AP, Point to point, point to multipoint bridging |
RF Index | Operating frequency：2.4000-2.4835GHz |
Wireless standard：IEEE802.11b/g/n MIMO 2x2; |
Output power：11b：27dBm；6-24Mbps：27dBm;36-54Mbps：24dBm ；MCS0：27dBm；MCS7：22dBm |
Receiving sensitivity： 1Mbps：-97dBm；11Mbps：-91dBm；6Mbps：-95dBm；54Mbps：-78dBm； MCS0-HT20：-90dBm；MCS7-HT20：-73dBm MCS0-HT40：-87dBm；MCS7-HT40：-71dBm |
Software Features | Network：support 16 SSID， WDS,WMM QoS, NTP 802.1q VLAN AP 2-layer,3-layer protocol |
Management：Telnet, CLI； Remote software upgrade； Device batch upgrading；SNMP v1/2/3 management；Remote Syslog； WEB configuration and debugging on management page |
Authentication and security: 802.11i；WAPI ；WEP/WPA/WPA（WPA-PSK,WPA-EAP）；PSK,portal,802.1x,MAC address authentication；Hide SSID, wireless security monitoring, wirless DOS attack resistance, monitoring of security configuration, rogue AP monitoring, wireless scanning detection, wireless fraud detection Attack detection, wireless breaking resistance |
Indicator Light | Power indicator：PWR |
Electrical Port Status Indicator: ETH |
Wireless Status Indicator：2.4G |
Warranty | 5 Years |
Order Information
Wireless AP
No. 01.04.0005 | CW2000-BW50100T1PGSAH3WX.X.X： indoor secure access point, 2.4G, 500mW，built-in antenna, POE PD（802.3af） |
POE power supply
No. 39.03.0008 | IWPOE-40WF：integration one way POE,1000M,anti-thunder,40W+ |
No. 39.03.0009 | IWPOE-40W：integration one way POE,1000M,40W+ |