Port Information | Port：One Bi-directional 1.25Gbps PON Port，SC/PC; 4 x 10/100Base-TX RJ45, auto-negotiation; |
Console Port：One RJ45 serial debug port |
Alarm Port：DC JACK |
Mechanical Structure | Dimensions：165 mm（W）× 120 mm（D）×30 mm（H） |
Mounting: Wall-mounting or placing |
Weight：<400g |
Protection Grade：IP20 |
Environmental Requirement | Operating Temperature：-20℃～ +65℃ |
Storage Temperature：-40℃～ +85℃ |
Relative Humidity：5% ～ 95% (non-condensation) |
MTBF : 500000 h |
PON Properties | PON port speed：up-link and down-link symmetry, 1.25Gbps |
Covering radius： 20km |
Optical connector type：SC/PC |
Optical physical condition：1000 BASE-PX20 |
Receiving sensitivity：-30dBm |
Security：ONU support MAC address authentication, Optical power detection DDMI, 1000BASE-PX20+ standard |
Software Features | Spanning tree：STP/RSTP |
Multicast: IGMP Snooping V1/2/3, controllable multicast |
VLAN：4K VLAN, Q in Q, Access, Trunk, VLAN Stacking, VLAN Translation |
QOS ：802.1p Cos, DSCP, 4 priority queues, SP, WRR scheduling discipline, traffic classification, port rate limit, DBA |
Storm Suppression：Broadcast storm suppression, Unknown-Multicast suppression and Unknown-Unicast suppression. |
Port mirroring：one-to-one port mirroring , 0ne-to-multiple ports mirroring |
Flow control：Full duplex IEEE 802.3x, half duplex back-pressure flow control |
ACL：Port-based, IP-based, MAC-based, VLAN ID-based |
Security：Defend against DoS, 802.1x |
Management ：CLI（telnet/SSH/Console）login, WEB graphic management interface, RMON（Remote Monitoring）MIB, SNMP v1/2. Alert information support relay output, Trap output and Syslog output mode |
Power Requirement | Supply mode：AC( 220V) convert to DC(12V) power adapter |
Operating Voltage：DC 12V |
Power Consumption：Full-load<2W |
Rated Current：0.5A |
Indicator Light | Power indicator：P1、P2 |
System Running Status Indicator：SYS |
Alarm Status Indicator：ALM |
PON Port Registration Indicator：LINK |
PON Port Fault Indicator：LOSS |
Port Status Indicator：Electrical Port ACT/SPD(1～4) |
Warranty | 5 Years |