IW3000-FW50001T2PGEA3S3WX.X.X is managed industrial grade wireless access point, which meets industrial design requirements. Featuring mature technology and open network standards, wide range operating temperature, strong anti-electromagnetic interference, anti salt fog, shocks, vibration resistance and POE power supply, the access point meets the harsh environmental requirements of industrial sites, and provides an efficient, reliable and fast solution.
IW3000-FW50001T2PGEA3S3WX.X.X supports one 1000Base-TX port(POE PD), and works on 2.4G+5G dual frequency band with speed up to 1167Mbps, support external antenna technology which the maximum transmit power of the access point can reach 500mW, support flexible networking for industrial field wireless access. Widely used in various industrial environments such as industrial control automation, road traffic control automation, building automatic control system, mine automatic control system, oil field control automation, hydropower station control automation, power system control automation and station monitoring system, and so on, provides stability, reliability and efficiency in creating a robust industrial Internet of things.
Key Features
1 x 10/100/1000Base-TX ，RJ45（POE PD） |
2.4Ghz+5Ghz dual-frequency band, Wireless speed up to 1167Mbps |
500mW high power RF output, high receiver sensitivity, dynamic power adjustment |
Point to point, point to multipoint bridging |
Waterproof, dust-proof ultraviolet-proof, IP67 protection shell |
External antenna, can select the appropriate antenna and feeder to achieve maximum wireless coverage |
-40℃～+85℃operating temperature, adaptive to harsh environments |
Support multiple wireless authentication methods and security methods. |
Specification
Port Information | Port：1 x 10/100Base-TX,RJ45, auto-negotiation(POE PD) |
Antenna interface：built-in, 14dBi, dual polarized antenna |
Power Interface：POE PD |
Reset port：one reset button |
Mechanical Structure | Dimensions：450 mm(H)× 89 mm(D)× 165 mm(W) |
Mounting： Rod-mounting |
Weight：<2.2kg |
Protection Grade：IP67 |
Environmental Requirement | Operating Temperature：-40℃～ +85℃ |
Storage Temperature：-40℃～ +85℃ |
Relative Humidity：5% ～ 95% (non-condensation) |
MTBF : 500000 h |
Power Requirement | Operating Voltage：DC 48V |
Power：POE PD（802.3af） |
Power Consumption：Full-load<12W |
Operating mode | Support CPE or AP operating mode; support Bridge、Soho‐Route mode |
RF Index | Operating frequency：2.4000-2.4835GHz |
Wireless standard： IEEE802.11b/g/n MIMO 2x2 |
Output power： 11b：27dBm；6-54Mbps：27dBm MCS0：27dBm；MCS7：27dBm |
Receiving sensitivity： 1Mbps：-97dBm；11Mbps：-91dBm； 6Mbps：-95dBm；54Mbps：-78dBm； MCS0-HT20：-90dBm；MCS7-HT20：-73dBm MCS0-HT40：-87dBm；MCS7-HT40：-71dBm |
Software Features | Network： 32 ESSID and BSSID WDS,WMM QoS, NTP 802.1q VLAN AP 2-layer,3-layer protocol |
Management： Telnet, CLI； Remote software upgrade Device batch upgrading SNMP v1/2/3 management Remote Syslog WEB configuration and debugging on management page |
Authentication and security: 802.11i, WAPI; WEP/WPA/WPA（WPA-PSK,WPA-EAP）; PSK,portal,802.1x,MAC address authentication, Hide SSID, wireless security monitoring, Wireless DOS attack resistance, monitoring of security configuration, Rogue AP monitoring, wireless scanning detection, wireless fraud detection Attack detection, wireless breaking resistance |
Indicator Light | Power indicator：PWR |
Electrical Port Status Indicator: ETH |
Wireless Status Indicator：2.4G |
Warranty | 5 Years |
Order Information
Wireless AP
No. 01.04.0001 | IW3000-FW50100T1PGEA3S3WX.X.X：one 100Base-TX,RJ45(802.3af POE), 802.11b/g/n ，2x2 MIMO，built in antenna,2.4G, 500mW |
POE power supply
No. 39.03.0008 | IWPOE-40WF：integration one way POE,1000M,anti-thunder,40W+ |
No. 39.03.0009 | IWPOE-40W：integration one way POE,1000M,40W+ |