IST2000 series are L2, managed, industrial DIN Rail time switch, which meet with the industrial design requirement. Featuring mature technology and open network standards, wide range operating temperature, strong anti-electromagnetic interference anti-salt fog, shocks, vibration resistance and redundant dual power supply (DC 24/48V), IST2000 series meet the harsh environmental requirement of industrial sites, and provide an efficient, reliable and fast solution for Internet of Things
IST2000 series are located at access layer and edge aggregation layer, support 2/4 x 1000Base- FX,0/4 100Base-FX,and 8 x 1000Base-TX ports, support precision time stamp protocol-IEEE-1588V2 based on hardware, and also support BC, E2E TC,P2P TC operating mode which time accuracy reach up to 50ns Support ERPS(recover y time<20ms), and can work with devices which are not support the protocol, apply to various condition that need high precision time synchronization
Key Features
2/4 x 1000Base-FX，0/4 x 100Base-FX, 8 x 1000Base-TX |
IEEE802.3/802.3u/802.3ab/802.3z/802.3x,Store and forward |
BC/E2E TC/P2P TC, multiple clock type |
ITU G.8032 ,ERPS, recover time<20ms |
IEEE-1588V2, support pass through non-1588 network, time precision up to 50ns |
Redundant dual power supply, resist reverse connection, over currency protection |
-40℃～+85℃ operating temperature, adaptive to harsh environments |
IP40, high strength metal shell, fan-less, low power consumption |
Specification
Port Information | 2/4 x 1000Base-FX SFP slots; 0/4 x 100Base-FX,single mode, dual fiber, SC(20km); 8 x 10/1001000Base-TX,RJ45 |
Console Port：One RJ45 serial debug port |
Power Interface：5 PIN,5.08mm , terminal block |
Mechanical Structure | Dimensions：82 mm(H)× 133 mm(D)× 135 mm(W) |
Mounting：DIN rail |
Weight：<1.2kg |
Protection Grade：IP40 |
Environmental Requirement | Operating Temperature：-40℃～ +85℃ |
Storage Temperature：-40℃～ +85℃ |
Relative Humidity：5% ～ 95% (non-condensation) |
MTBF : 500000 h |
Switching Properties | MAC Address Table：8K |
Forwarding mode：Store-and-forward |
Buffer Capability：4.1Mbits |
Forwarding frame length：Up to 10000Bytes |
Transmission Distance | Twisted-pair：100M（standard CAT5/CAT5e cable） |
Multi-mode Fiber： 850nm,2Km; 1310nm, 5Km |
Single-mode Fiber：1310nm,20Km; 1310nm, 40Km;1310nm,60Km; 1550nm, 80Km |
Power Requirement | Operating Voltage：DC 24/48V or AC 220V |
Power Consumption：Full-load<15W |
Software Features | Clock Characteristics： PTPV2（IEEE1588-2008） time precision up to 50ns,support Unicast and multicast, ordinary clock, boundary clock, transparent clock（E2E,P2P）; best main clock：BMC algorithm |
Redundant network： STP/RSTP/MSTP， EAPS/ERPS |
Multicast：IGMP Snooping V1/V2/V3，GMRP |
VLAN：IEEE 802.1Q 4K VLAN，QINQ |
Link Aggregation：manual /static/ LACP |
QOS：COS、DSCP，8 queues，WRR/SP/WFQ scheduling , QOS Policy |
Management Function：CLI/WEB/SNMP, and Primestone NIS management system |
Diagnostic Maintenance：Port mirroring，Syslog，Ping |
Alarm management：1 way relay alarm output, RMON, SNMP Trap |
Security：DHCP Snooping，Option 82，802.1X，User hierarchical management, ACL,DDOS, port based MAC filtering / binding |
Data control：Port-based ingress/egress speed limit，Full duplex IEEE 802.3x, half duplex back-pressure flow control. Broadcast storm suppression, Unknown-Multicast suppression and Unknown-Unicast suppression. |
Indicator Light | Power indicator：P1、P2 |
System Running Status Indicator：SYS |
Alarm Status Indicator：ALM |
Port Status Indicator：Electrical Port ACT/SPD(1～8); Optical Port 9 ～ 12 |
Warranty | 5 Years |
Dimension
Order Information
No. 01.06.0003 | IST2000-001204O3P3EAHS2SX.X.X：8 x 1000Base-TX; 4 x 1000Base-FX SFP slots(not include SFP) |
No. 01.06.0004 | IST2000-001002O3P3EAHS2SX.X.X: 8 x 1000Base-TX; 2 x 1000Base-FX SFP slots(not include SFP) |
No. 01.06.0005 | IST2000-041204O304EMP3EAHS2SX.X.X：8 x 1000Base-TX; 2 x 1000Base-FX SFP slots(not include SFP); 4 x 100Base-FX,single mode, dual fiber,SC(20km) |